Insights/Regulation

CO₂ Performance Ladder for contractors: how to measure Scope 1 for your machines and vehicles.

If you bid for public works in Belgium or the Netherlands, the CO₂ Performance Ladder is landing on your desk more and more often. For a contractor, much of the work comes down to one item: the fuel your machines and vehicles burn, from excavators and wheel loaders to vans and trucks. Here's what the Ladder asks, what changes with Handbook 4.0, and how to measure those emissions per site in a way an auditor can check.

Thibaut De RidderHead of Product, monytr7 min read

What is the CO₂ Performance Ladder?.

The CO₂ Performance Ladder is a certification scheme that shows an organisation knows its CO₂ emissions, reduces them and communicates about them. The Dutch foundation SKAO manages it; in Belgium, BENOR coordinates its use. An accredited certification body carries out the audit.

Public clients use the certificate in two ways:

  • As an award advantage: a fictitious discount on your bid price that grows the higher you are on the Ladder.
  • As a requirement: Infrabel and De Werkvennootschap, for example, asked for level 5 in recent contracts.

Handbook 4.0: from five levels to three steps.

  • Handbook 4.0 was published on 14 January 2025. Certification against it has been possible since 14 July 2025.
  • The five levels of Handbook 3.1 make way for three steps: step 1, reducing CO₂ in your own organisation (Scope 1 and 2, roughly the old levels 1 to 3); step 2, reducing CO₂ with your value chain; step 3, reducing CO₂ towards zero in 2050.
  • Audits under 3.1 remain possible until 14 January 2027. The last 3.1 certificates expire by January 2028 at the latest.
  • Until 14 January 2027, tenders based on 3.1 accept 4.0 certificates as a transition rule: step 1 counts as level 3, steps 2 and 3 as level 5.

For your machines and vehicles, the principle doesn't change: Scope 1 is the foundation of every step.

What the Ladder asks of your machines and vehicles.

  • An annual emissions inventory with Scope 1 and 2. Scope 1 is the fuel you burn yourself: in machines, vans, trucks and company cars. Scope 2 is your electricity, including what you use to charge electric machines and vehicles.
  • Business mileage in private cars falls under Scope 3. At step 1, you may choose whether to report it.
  • A CO₂ project dossier for projects with an award advantage, covering that project's emissions: Scope 1 and 2, plus material Scope 3.
  • Emission factors from the official list.
  • A choice for Scope 1: well-to-wheel (including fuel production and transport) or tank-to-wheel (exhaust only). If you choose tank-to-wheel, the emissions from producing the fuel (well-to-tank) must still be part of your approach to reduction, communication and collaboration.

Where it goes wrong in practice.

  • Fuel receipts per depot, not per site. The project dossier asks for emissions per project, but the fuel comes from one tank or one supplier invoice.
  • Fuel cards per vehicle, but not per site: you know what a van filled up with, not which project it drove for.
  • Machines working on several sites in the same month.
  • HVO counted as ordinary diesel. You then report far too much.
  • Electric machines and vehicles disappearing from view. They're 0 in Scope 1, but their electricity use belongs in Scope 2, including when they charge at home or on site.
  • Averages without a source: a consumption figure someone once put in a spreadsheet, with nobody knowing where it came from.

How to measure Scope 1 per machine, per vehicle and per site.

  1. Record consumption per machine and per vehicle from the best available source: the fuel counter, the consumption the machine or vehicle reports itself, the fuel card, or an entered average (per operating hour for machines, per 100 km for vehicles). Note which source you used.
  2. Link machines and vehicles to sites by their location, so hours, kilometres and fuel add up per project.
  3. Use the right emission factor: the one for the right fuel (pump diesel, HVO …) and the right year, from the official list.
  4. Show what you don't know: which share of your operating hours is measured, estimated or unknown.
  5. Record your method: which list, which edition, well-to-wheel or tank-to-wheel. That's exactly what an auditor checks.

How monytr helps.

monytr takes operating hours, kilometres, fuel and location straight from your machines and vehicles, whatever the brand. It calculates Scope 1 and 2 per machine, per vehicle and per site, with the emission factors Ladder auditors use. For each site you get a summary to build your CO₂ project dossier on, with the source and edition of every factor.

→ More about CO₂ reporting

Try it with your own figures: free CO₂ calculator →

FAQ

FAQ

Talk to us

Get in touch.

A walkthrough of the platform - idle time, fault codes, fuel and utilisation in one screen - and a straight answer on how it would fit your fleet.

Get in touch
Keep reading

More from monytr Insights.