VSME and the value chain cap: which energy and CO₂ figures can your client ask you for?.
Large clients and banks increasingly send sustainability questionnaires to their suppliers and subcontractors. Since 2026, the EU limits what they can require. Here's what changed, what the voluntary standard asks about energy and CO₂, and how to have those figures ready for your machines and vehicles.
What changed: the CSRD after the Omnibus.
- The Omnibus Directive (EU) 2026/470 limits the CSRD to companies with more than 1,000 employees and more than €450 million in turnover. Both conditions must be met at the same time.
- The threshold applies from financial year 2027. The directive has been in force since 18 March 2026; member states, including Belgium, must transpose it into national law by 19 March 2027.
- Most contractors, rental companies and transport firms therefore fall outside the CSRD. Their large clients don't, and those clients need data from their suppliers.
The voluntary standard (VSME).
- Delegated Regulation (EU) 2026/1560 of 3 July 2026 sets a voluntary reporting standard for companies outside the CSRD. It's based on the 2025 VSME recommendation.
- The standard has a basic module (B1 to B11) and a comprehensive module (C1 to C9). The basic module is the required first step if you want to use the comprehensive module.
- It's voluntary: nobody is required to report under the VSME.
The value chain cap: what your client can require.
- For financial years starting on or after 1 January 2027, a company in scope of the CSRD may not require more from a company with on average 1,000 employees or fewer than the datapoints in Annex II of the regulation. Companies with 10 employees or fewer get a shorter list.
- The cap applies to data the client needs for its own CSRD reporting. Other commercial requests, such as requirements in a tender, aren't covered. A client can still ask for a CO₂ Performance Ladder certificate, for example.
What the standard asks about energy and CO₂ (B3).
- Total energy consumption in MWh. If you can obtain the data, also split into renewable and non-renewable, and into electricity and fuels. Voluntary for companies with 10 employees or fewer.
- Gross Scope 1: direct emissions from sources you own or control, in tonnes of CO₂ equivalent.
- Location-based Scope 2: emissions from the electricity you buy, calculated with the average grid factor.
- All according to the GHG Protocol Corporate Standard (2004).
What that means for your machines and vehicles.
- Scope 1, for most contractors and rental companies, is largely the fuel of machines, vans and trucks.
- Scope 2 includes the electricity you use to charge electric machines and vehicles.
- Energy in MWh comes from the litres: litres × heating value. Example: pump diesel B7 has a heating value of 35.9 MJ per litre, so 1,000 litres is about 9.97 MWh. About 6.4% of that is renewable, because B7 contains 7% biodiesel by volume.
How to prepare.
- Track consumption per fuel type, in litres or kilograms, per machine and per vehicle. Not one total of "diesel".
- Track electricity separately, including chargers and electric machines.
- Use official emission factors and heating values, and record which list and edition you used.
- Convert energy to MWh, split into renewable and non-renewable.
- Answer in the standard's format, so your client can use your figures without conversion, and you don't start over for every client.
How monytr helps.
monytr takes fuel, operating hours, kilometres and electricity use straight from your machines and vehicles. The sustainability report contains exactly the B3 figures: energy in MWh, renewable and non-renewable, Scope 1 and location-based Scope 2, with the source of every factor.